Keyword Index

A

  • AA6061-T6 Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
  • ABAQUS software Bolt Pre-tension Effect on Performance of Bolted Extended End-plate Moment Connections under Cyclic Loading [Volume 35, Issue 3, 2022, Pages 531-543]
  • Acid Immersion Test An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
  • Active confinement Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
  • Active design Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
  • Active filter Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
  • Active flux Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
  • Active thermography Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
  • Additive Manufacturing Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
  • Adhered mortar Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Adhesives Bending Strength Evaluation of Glulam Beams Made from Selected Nigerian Wood Species [Volume 35, Issue 11, 2022, Pages 2120-2129]
  • Advanced Exergy Scrutiny Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
  • Aging Estimation Method Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
  • Agricultural Robot Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
  • Air circulation Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
  • Air Injection Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
  • Akbari-Ganji’s Method Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
  • Al 5083 Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
  • Alccofine Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
  • Alccofine Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • Allocation Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
  • Alternative building material Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
  • Alumina Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
  • Alumina Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
  • Aluminum Alloy Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
  • Aluminum Metal Matrix Composites Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
  • Amplitude attenuation ratio An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
  • Amplitude modulation An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
  • Analysis Hierarchy Process Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
  • Analysis of variance Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
  • Anchorage length Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
  • Angular velocity Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
  • ANN-Artificial nueral network Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
  • Annual Energy Production Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
  • Ant Colony Optimization Algorithm Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
  • API 5L Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
  • Arrival time Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
  • Artificial Neural Network An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
  • Artificial Neural Networks A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Asperity Analysis Randon Causes Repeatability Errors Inducted by Friction at Joints in Industrial Robots [Volume 35, Issue 2, 2022, Pages 451-457]
  • Asynchronous generator Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
  • ATENA-3D Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
  • Autogenous TIG welding Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
  • Automatic Guidance System Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
  • Automotive battery industry New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
  • Auxiliary building Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Avalanche Breakdown A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
  • Axial load Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]

B

  • Backscatter Radiography Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
  • Balloon energy A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
  • Banking Services Analysis of Role of Cloud Computing in Providing Internet Banking Services: Case Study Bank Melli Iran [Volume 35, Issue 5, 2022, Pages 1082-1088]
  • Basalt fibre Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
  • Base isolation Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
  • Basic Scheduling Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
  • Batch outsourcing Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
  • Battered pile Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
  • Battery industry A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
  • Battery Sizing Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
  • Beam-column joint Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint [Volume 35, Issue 7, 2022, Pages 1237-1245]
  • Beam Column Joints Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
  • Bearing Capacity Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
  • Behaviour The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
  • Belled piles An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
  • Benchmarking Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
  • Benders Decomposition A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Benefit-cost Ratio Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
  • Benford’s Law A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
  • Bi-directional converter Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
  • Bill of quantity Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
  • Binary Logit Regression Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
  • Binomial tree Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]
  • Bioactive Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
  • Bi-objective mathematical model A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
  • Bi-objective mathematical model New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
  • Biodiesel Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
  • Bio-mediated Soil Improvement Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
  • Bio Resin Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
  • Bi-phase coded Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
  • Bitumen Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
  • Bonding Strength Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
  • Bone Tissue Engineering Chitosan Cross Glutaraldehyde: Introducing Optimum Condition for Cross-linking the Chitosan/Gelatin Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1967-1980]
  • Bottom-hat filter An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
  • Box Shear Test Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
  • Brake pad Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
  • Broaching tool Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
  • Brownian motion Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
  • Bulk Power Systems Cost-based Risk Approach for Spinning Reserve Assessment in Bulk Power Systems [Volume 35, Issue 11, 2022, Pages 2186-2195]

C

  • Ca-K/Al2O3 Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
  • Calcination Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
  • Calcium Carbonate Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Calcium Carbonate Powder Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
  • Canny edge detector New Dominant Color Descriptor Features Based on Weighting of More Informative Pixels using Suitable Masks for Content-Based Image Retrieval [Volume 35, Issue 8, 2022, Pages 1457-1467]
  • Cardiac Tissue Engineering In Silico Analysis of Stem Cells Mechanical Stimulations for Mechnoregulation Toward Cardiomyocytes [Volume 35, Issue 11, 2022, Pages 2229-2237]
  • Cascaded Feed Forward Neural Network Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Case-Based Reasoning A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
  • Casing failure Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
  • Caspian Sea Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
  • Cathode copper Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
  • Cathode edge Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
  • Cation distribution Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
  • Cement Fly Ash Gravel Pile Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
  • Centipede Wave Energy Converter Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
  • Ceramic membrane Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • CFD analysis Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
  • Chamfer fins Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
  • Channel model Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
  • Channel Modelling Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
  • Characterization Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
  • Choice Model Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
  • Circular Box Beam Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
  • Civil Application Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
  • Claim Management Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
  • Clayey soils A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
  • Clay mineral Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
  • Closed-loop supply chain A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
  • Cloud-fog gaming A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
  • Clustering Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
  • Cobalt ferrite Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
  • Coconut Sap Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Cold supply chain A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
  • Collapsible Soil Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]
  • Collocation method Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
  • Colorimetric detection Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
  • Column Beam Connection Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
  • Column Leaching Test Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Columns Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Combined Pile Raft Foundation Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
  • Combined point Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
  • Common mode voltage An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
  • Common Point Curve Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
  • Complexity Reduction Ratio Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Composite Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
  • Composite elements Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Composites Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
  • Compressive strength An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
  • Computational Modeling An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
  • Computation Latency A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
  • COMSOL Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
  • Concrete An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
  • Concrete Enhancement of the Shear-flexural Strength of the Rubberized Concrete Prism Beam by External Reinforcement [Volume 35, Issue 5, 2022, Pages 1017-1023]
  • Concrete Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Concrete Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
  • Concrete Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
  • Concrete Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
  • Concrete-filled cold-formed steel shear wall (CFCSW) Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
  • Concrete-filled Double-skin Tubes Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
  • Concrete-steel composite jacket Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
  • Confinement of joint Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
  • Congestion Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
  • Consolidation The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
  • Constraint Programming A Constraint Programming Approach to Solve Multi-skill Resource-constrained Project Scheduling Problem with Calendars [Volume 35, Issue 8, 2022, Pages 1579-1587]
  • Construction Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
  • Construction Companies Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
  • Construction Industry Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
  • Contamination Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
  • Content-based image retrieval New Dominant Color Descriptor Features Based on Weighting of More Informative Pixels using Suitable Masks for Content-Based Image Retrieval [Volume 35, Issue 8, 2022, Pages 1457-1467]
  • Continuous deep beams Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
  • Controllers design optimization Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
  • Co-occurrence Matrix A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
  • Co-precipitation Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
  • Coprecipitation Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
  • Core Sandwich Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
  • Corrosion inhibitor Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
  • Cost Effective Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
  • Counter-flow Enthalpy Exchanger Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Covariance descriptors Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
  • COVID-19 pandemic A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
  • Crack distribution Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
  • Crack pattern Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
  • Crimped steel fiber Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
  • Crisis Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
  • Cross accumulative roll-bonding Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
  • Crosswalk Compliance Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
  • Crystallite Size Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
  • Current Transformer Saturation Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
  • Customer Behavior Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
  • Cutting parameters Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
  • Cutting tool design Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]

D

  • D3 steel Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
  • Dairy product A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
  • Damage Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
  • Damage detection The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
  • Data mining The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
  • Data Stream Mining The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
  • DC-generator Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
  • DC-Signal Cancellation Block Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
  • Decision Making Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
  • Decision support system Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
  • Deep Learning Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
  • Deep Learning A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
  • Deep Learning Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
  • Deformation Response Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
  • Delamination Growth Analytical Investigation on the Stress Distribution in Structural Elements Reinforced with Laminates Subjected to Axial Loads [Volume 35, Issue 4, 2022, Pages 692-697]
  • Demand forecasting A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Density Bending Strength Evaluation of Glulam Beams Made from Selected Nigerian Wood Species [Volume 35, Issue 11, 2022, Pages 2120-2129]
  • DFIG Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
  • Diameter-to-thickness ratio Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
  • Dielectric Constant Investigation of Dielectric Properties of Ni/n-TiO2/p-Si/Al Heterojunction in Wide Range of Temperature and Voltage [Volume 35, Issue 4, 2022, Pages 698-705]
  • Dielectric properties Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method [Volume 35, Issue 7, 2022, Pages 1300-1306]
  • Differential Amplifier A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
  • Differential pickup probes Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
  • Diffusion and Allen-Cahn Equations A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
  • Digital Light Processing Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
  • Digital Supply Chain Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
  • Direct Torque Control Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
  • Discrete Wavelet transform An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
  • Dispersion Coefficient Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Displacement Ductility Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint [Volume 35, Issue 7, 2022, Pages 1237-1245]
  • Displacement Matrix Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
  • Distance measures Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
  • Distribution system Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
  • Document image retrieval An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
  • Dominant color descriptor New Dominant Color Descriptor Features Based on Weighting of More Informative Pixels using Suitable Masks for Content-Based Image Retrieval [Volume 35, Issue 8, 2022, Pages 1457-1467]
  • Dopamine Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
  • Doppler Effect Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
  • Dowels Due Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
  • Drag Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Drilling Fluid Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
  • Driving frequency Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
  • Dry Sand An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
  • Dual-Active Bridge Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
  • Dual-rotor wind turbine Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
  • Ductility Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
  • Ductility Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Ductility Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
  • Ductility index Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
  • Duplex stainless steel Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
  • Durability An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
  • Durability Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Dynamic Load Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]

E

  • Earliest Deadline First algorithm Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
  • EBSD Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
  • Economic Analysis Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
  • Eddy Current Testing Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
  • Edge detection Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
  • Edge detection A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
  • EDM Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
  • Elastic wave Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
  • Electrical current density Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
  • Electrical Discharge Machining Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
  • Electrical drives An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
  • Electric Vehicle Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
  • Electric Vehicle Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
  • Electrochemical Measurement Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
  • Electrode displacement Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
  • Electromagnetic Force Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
  • Electrorefining Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
  • Elevated Temperature Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
  • Elevated temperatures Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Elgamal Crytosystems Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
  • ELISA Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
  • Elution Curve Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Emission Costs Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
  • Empirical Models Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • Encryption Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
  • Endogenous/exogenous Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
  • End plate connection Bolt Pre-tension Effect on Performance of Bolted Extended End-plate Moment Connections under Cyclic Loading [Volume 35, Issue 3, 2022, Pages 531-543]
  • Energy dissipation Experimental and Numerical Study on a New Double-walled Tuned Liquid Damper [Volume 35, Issue 1, 2022, Pages 29-44]
  • Energy dissipation Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint [Volume 35, Issue 7, 2022, Pages 1237-1245]
  • Engineered cementitious composites Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
  • Entropy Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
  • Envelope Curve Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
  • Epoxy resin Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
  • Epoxy resin Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
  • Epsilon-constraint Method New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
  • Error correcting output coding Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
  • Eulerian-Eulerian method Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
  • Excitation coil Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
  • Excitation Frequency Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
  • Experimental Investigation Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
  • External post-tensioning Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]

F

  • Face Hallucination Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • Face recognition Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • Face recognition Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
  • Factor analysis Analysis of Role of Cloud Computing in Providing Internet Banking Services: Case Study Bank Melli Iran [Volume 35, Issue 5, 2022, Pages 1082-1088]
  • Failure Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
  • Failure mode Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
  • Failure Mode and Effects Analysis A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
  • Failure probability Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
  • Fast Fourier Transform Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Fault Diagnosis A New Technique for Online Open Switch Fault Detection and Location in Single-phase Pulse Width Modulation Rectifier [Volume 35, Issue 9, 2022, Pages 1759-1764]
  • Fe2O3 nanoparticle Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Feature Extraction Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
  • Feature selection Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
  • Fiber Concrete Beams Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
  • Fifth Generation Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Filtration Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
  • Fine aggregate Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
  • Fine recycled aggregate Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Finite Element Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
  • Finite Element Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
  • Finite Element Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals [Volume 35, Issue 7, 2022, Pages 1398-1415]
  • Finite Element Analysis (FEA) Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
  • Finite element method Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
  • Finite element method 3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
  • Finite element method Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
  • Finite element model Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]
  • Finite Impulse Response Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Finite volume Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Fire behavior Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Fire damages Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
  • Fireproof coating Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Flat slab Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
  • Flexible manufacturing system Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
  • Flexible pavement Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
  • Floor openings Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]
  • Flow pattern map Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths [Volume 35, Issue 4, 2022, Pages 685-691]
  • Flowshop Scheduling Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
  • Fluid-structure interaction Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals [Volume 35, Issue 7, 2022, Pages 1398-1415]
  • Fly ash Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
  • Fly ash Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
  • Fly ash and stone powder An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
  • Fmincon Bionic Perception Method of Navel Orange Plucking Position Based on Fmincon and PD Angle Control [Volume 35, Issue 11, 2022, Pages 2265-2274]
  • Foamy method Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
  • Formability Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
  • Formability Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
  • Fouling Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
  • Fractional derivative A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
  • Fracture behavior Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
  • Fragility Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
  • Frequency Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
  • Frequency Lock Loop Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
  • Friction Pendulum System Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
  • Friction Stir Incremental Forming Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
  • Friction Stir Processing Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
  • Friction Stir Welding Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
  • Front-End Preamplifier A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
  • Froude number Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths [Volume 35, Issue 4, 2022, Pages 685-691]
  • FRP composites Analytical Investigation on the Stress Distribution in Structural Elements Reinforced with Laminates Subjected to Axial Loads [Volume 35, Issue 4, 2022, Pages 692-697]
  • Full factorial experimentation Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
  • Fuzzy Centralized Coordinate Learning Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
  • Fuzzy logic A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Fuzzy Logic Model Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
  • Fuzzy multi-criteria decision making A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
  • Fuzzy-PID controller Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
  • Fuzzy Sets Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
  • Fuzzy Uncertainty Approach Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
  • Fuzzy VIKOR A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]

G

  • Gabor features Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
  • Galerkin method Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
  • Galerkin method Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
  • Galvanostatic test Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
  • Gamma rays Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Generating Electricity Power Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
  • Generative adversarial network Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • Generative Adversarial Networks A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
  • Generator scheduling Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
  • Gene Regulatory Network An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
  • Genetic Algorithm Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Genetic Algorithm An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
  • Genetic Algorithm Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
  • Genetic algorithms. MPPT Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
  • GEO5 software Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
  • Geopolymer Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
  • Geopolymer Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
  • Geopolymer concrete Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
  • Glass/epoxy Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
  • Glass fibers Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Gol-E-Gohar Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
  • Grain refinement Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
  • Graph Centrality Algorithms Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
  • Graphite Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
  • Grasshopper optimization Digital Communication Based on Image Security using Grasshopper Optimization and Chaotic Map [Volume 35, Issue 10, 2022, Pages 1981-1988]
  • Green concrete Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
  • Green tea Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
  • Grey Relational Analysis Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
  • Grey Relational Analysis Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Gripping force Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
  • Ground Differential Protection Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
  • Gypseous soil Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]

H

  • Halpin-Tsai Understanding the Effect of Interfacial Interphase on the Elastic Response of Hollow Glass Microsphere Reinforced Microcomposites [Volume 35, Issue 5, 2022, Pages 977-987]
  • Hardware Trojan Detection Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
  • Hardy Multiquadric Function Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
  • Harmonic Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
  • Harmonic load Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
  • Harmonic loading Static and Dynamic Behavior of High-strength Lightweight Reinforced Concrete One-way Ribbed Slabs [Volume 35, Issue 4, 2022, Pages 732-739]
  • Harvest of maximum energy A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
  • Health Service Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
  • Heat The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
  • Heat Transfer Coefficient Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
  • Heat transfer enhancement Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
  • Heat treatment Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
  • Heavy-duty Diesel Engine Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
  • Heavyweight concrete Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Hematite (α-Fe2O3) Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
  • Herschel-Bulkley model Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
  • Hexagonal Gradient A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
  • Hexagonal Lattice A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
  • HfB2-SiC composite Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
  • Hierarchical Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
  • High-Density Polyethylene Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
  • High Density Poly Ethylene Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
  • High-Performance Concrete Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • High-velocity Oxy Fuel High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
  • Histogram of Oriented Gradients An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
  • Hollow concrete blocks Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
  • Hollow Glass Microsphere Young’s Modulus Understanding the Effect of Interfacial Interphase on the Elastic Response of Hollow Glass Microsphere Reinforced Microcomposites [Volume 35, Issue 5, 2022, Pages 977-987]
  • Homotopy Perturbation Method A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
  • Hot Corrosion High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
  • Hot Mix Asphalt 3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
  • Human Action recognition Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
  • Human Activity Recognition Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
  • Hybrid genetic algorithm Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
  • Hydrate Dissociation Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
  • Hydrate Reservoir Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
  • Hydraulic Power Take-off System Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
  • Hydrochloric acid Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
  • Hydrogen Responsibility Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
  • Hydrostatic Test Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
  • Hyperbolic Model Parameters Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
  • Hyperelasticity Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
  • Hysteretic curves Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]

I

  • Identification Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
  • Identity Preserving Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • IIT PAVE Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
  • Image Forgery Detection A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
  • Image Segmentation An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
  • Image Splicing A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
  • Immobilization Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Impact Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
  • Impingement flow Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
  • Incremental Learning The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
  • Indoor Pathloss Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
  • Induction motor Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
  • Industrial Robot Analysis Randon Causes Repeatability Errors Inducted by Friction at Joints in Industrial Robots [Volume 35, Issue 2, 2022, Pages 451-457]
  • Industrial Robot Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
  • Industrial shed Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
  • Infill wall Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
  • Inflation pressure Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
  • Information technology A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
  • Inrush Current Inrush Current Reduction by a Point-on-wave Energization Strategy and Sequential Phase Shifting in Three-Phase Transformer [Volume 35, Issue 12, 2022, Pages 2321-2328]
  • In-situe Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
  • Intelligent Controller Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Intelligent Transportation System Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
  • Interfacial transition zone Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Interim activity Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
  • International Telecommunication Union Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
  • Interphase Understanding the Effect of Interfacial Interphase on the Elastic Response of Hollow Glass Microsphere Reinforced Microcomposites [Volume 35, Issue 5, 2022, Pages 977-987]
  • Interphase Investigation of Carbon Black/ Polyester Micro-composites: An Insight into Nano-size Interfacial Interactions [Volume 35, Issue 6, 2022, Pages 1135-1143]
  • Inventory Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
  • Inventory & Carrying Policy A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
  • Inverse Kinematics Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
  • IoT Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]

J

  • Java-Bali power system Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
  • Jensen-Shannon Divergence Fractal Geometry Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
  • Jensen-Tsallis Divergence A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
  • Jiles-Atherton Model Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
  • Joint modelling Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]

K

  • Kaolinite The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
  • Keshtel algorithm Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
  • Knowledge transfer Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]

L

  • Laboratory Study Beam Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
  • Lagrangian Relaxation Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
  • Laminate Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
  • Lane Detection A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
  • Last-mile network A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Lateral Behaviour Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
  • Lateral load Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
  • Layered Materials Analytical Investigation on the Stress Distribution in Structural Elements Reinforced with Laminates Subjected to Axial Loads [Volume 35, Issue 4, 2022, Pages 692-697]
  • Least Laxity First algorithm Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
  • Least Squares Method Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
  • Lift force Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Lightweight concrete jacket Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
  • Linear accelerator Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
  • Linear gain A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
  • Line of meshing A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
  • Liquid Desiccant Air Conditioner Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Liquid-gas ejector Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
  • Lithium Chloride Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Load Bearing Capacity Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
  • Load-carrying capacity Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
  • Load-deflection curves Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
  • Load forecasting A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Local Branching A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Localization The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
  • Location A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
  • Location Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
  • Logarithmic surface Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
  • Log-Euclidean kernel SVM Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
  • Longest Processing Time Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
  • Long-short Term Memory Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
  • Low Plastic Soil Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
  • LS-DYNA Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]

M

  • Machinability Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
  • Magnesium oxide Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]
  • Magnetic propertie Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
  • Magnetic properties Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Magnetic separator Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
  • Magnetite Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
  • Magnetorheological Fluid Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
  • Manifold microchannel heat sink Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
  • Mantissa Distribution A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
  • Material removal rate Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
  • Maximum Power Point Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Mechanical properties Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Mechanical properties Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
  • Mechanical properties Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
  • Mechanical properties Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Mechanical properties Investigation of Carbon Black/ Polyester Micro-composites: An Insight into Nano-size Interfacial Interactions [Volume 35, Issue 6, 2022, Pages 1135-1143]
  • Mechanical properties Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
  • Mechanical properties Sustainable Use of Polypropylene Fibers as a Cement Mortar Reinforcement [Volume 35, Issue 8, 2022, Pages 1494-1500]
  • Mechanical properties Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
  • Mechanical properties Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
  • Mechanical properties Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Mechanical Strength Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
  • Medical Center Planning Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
  • Medical staff and equipment optimization Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
  • Merging point Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
  • Meta-heuristic An Efficient Task Scheduling Based on Seagull Optimization Algorithm for Heterogeneous Cloud Computing Platforms [Volume 35, Issue 2, 2022, Pages 433-450]
  • Metaheuristic Algorithm Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
  • Metaheuristic Genetic Algorithms A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
  • Meteorological data Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
  • Microalgae Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
  • Microbial Geo-Technology Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
  • Micro-Composite Understanding the Effect of Interfacial Interphase on the Elastic Response of Hollow Glass Microsphere Reinforced Microcomposites [Volume 35, Issue 5, 2022, Pages 977-987]
  • Microfluidic Systems Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
  • Micro-perforated panel absorber Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
  • Micro Silica Gel Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
  • Microstructure Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Microstructure Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
  • Microstructure Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
  • Microstructure Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
  • Milling machining Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
  • Mine Soil Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
  • Mixed convection heat transfer Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
  • Mixed fleet Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
  • Mixed-Integer Linear Programming Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
  • Mixing time Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
  • Mixture method Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
  • Mobile Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
  • Mobile marketing Analyzing Factors Influencing Mobile Social Media Marketing Acceptance among Customers [Volume 35, Issue 6, 2022, Pages 1209-1216]
  • Modal Analysis Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
  • Modal Analysis Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
  • Modal Frequency Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
  • Modified Buton asphalt Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
  • Modified Simple Additive Method Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
  • Moisture content Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Moisture Sensitivity Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
  • Molecularly imprinted polymers Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
  • Moment Redistribution Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
  • Monte Carlo simulation Prioritization of Transmission Network Components Based on their Failure Impact on Reliability of Composite Power Systems [Volume 35, Issue 3, 2022, Pages 502-509]
  • Monte Carlo simulation Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
  • Mortar mixing approach Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Mud density Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
  • Mud Salinity Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
  • Mud Temperature Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
  • Multi-class classification Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
  • Multi-criteria decision-making method New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
  • Multi-depot vehicle routing A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
  • Multi-Label Classification Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
  • Multi-label Text categorization Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
  • Multi-lane high speed highways Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
  • Multi-Level Switching A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
  • Multimaterial forest fire fighting vehicle Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]
  • Multinomial Logit Model Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
  • Multi-Objective Optimization Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
  • Multiple-criteria decision-making Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
  • Multiple-criteria Decision making Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
  • Multi-Skill A Constraint Programming Approach to Solve Multi-skill Resource-constrained Project Scheduling Problem with Calendars [Volume 35, Issue 8, 2022, Pages 1579-1587]
  • Multi-Valued Logic A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
  • MUXED-D scan cell Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
  • MVL correction buffer A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
  • MVL inverter A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]

N

  • Nanocomposite Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Nanofluid Effects Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
  • Nanofluid Flow Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
  • Nanofluids An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • Nano KCC-1/Ag Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
  • Nanoparticles Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
  • Nano-SiO2 Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
  • Nanostructures Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
  • Nanotechnology Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
  • Natural Aggregates Concrete Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
  • Natural fine aggregate Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Navier-Stokes equations Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
  • Near-fault earthquake Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
  • Neural third-order sliding mode Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
  • Neutral Point Clamped An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
  • Neutrosophic fuzzy programming A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
  • New Lighting Base Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
  • Ni nanoparticle Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
  • Node Micro Controller Unit ESP8266 Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
  • Nodule Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
  • Non-circular Gear A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
  • Non-cohesive Soil Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
  • Non-Destructive Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
  • Non-destructive test Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
  • Nonlinear analysis Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
  • Non-Newtonian Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
  • Non-structural components Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Non-traditional machining Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
  • Normalised toughness Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
  • Novel Curve A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
  • Nowledge Flow Network Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
  • Nozzles Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
  • Numerical Behavior of Raft Foundation Built on Layered Soil under Different Earthquake Excitation [Volume 35, Issue 8, 2022, Pages 1509-1515]
  • Numerical analysis Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
  • Numerical modeling Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]

O

  • Oil Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
  • Oil Spills A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
  • Omicron An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
  • Onyx Stone Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Open switch fault A New Technique for Online Open Switch Fault Detection and Location in Single-phase Pulse Width Modulation Rectifier [Volume 35, Issue 9, 2022, Pages 1759-1764]
  • Operating Room Planning Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
  • Opimization Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Optical Fiber Circuit A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
  • Optic Disk An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
  • Optimized composite absorber Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
  • Optimum Bacteria Suspension Volume Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
  • Organic deposits Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
  • Organic Rankine Cycle Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
  • Oscillating Wave Surge Converter Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
  • Outsourcing Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
  • Overall Equipment Effectiveness Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
  • Oxidation-Reduction Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]

P

  • Palm oil Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
  • Pandemic An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
  • Parabolic trough collector An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • Parametric active contour model A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
  • Parametric method A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
  • Parametric Studies Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
  • Parcel locker A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Particle Swam Optimization Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Particle Swarm Optimization Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
  • Particle Swarm Optimization A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
  • Payback Period Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
  • Peak current Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Peat Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
  • Pedestrian Crossing Behavior Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
  • Pedestrian Safety Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
  • Performance evaluation criterion Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
  • Performance levels Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
  • Performance Management Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
  • Permeability Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
  • Phase-locked Loop Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
  • Phase-Shift Angle Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
  • Photo-catalyst Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
  • Photovoltaic Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
  • Photovoltaic Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
  • Photovoltaic A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
  • Photovoltaic energy storage system Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
  • PID tuning Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
  • Pigments Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
  • Pipeline bursting Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
  • Planing hull Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Planned Special Event Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
  • Plasma spraying Evaluation of Corrosion Resistance of Bi-layered Plasma-sprayed Coating on Titanium Implants [Volume 35, Issue 4, 2022, Pages 635-643]
  • Plate The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
  • Plaxis 3D Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
  • Plaxis 3D Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
  • PLS-SEM Influence of Project and Affected Local Community Interests Level on Social Conflicts in Indonesian Infrastructure Projects [Volume 35, Issue 7, 2022, Pages 1217-1226]
  • Pneu-Net Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
  • Polyethylene Terephthalate Waste Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
  • Polypropylene Fibers Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Polypropylene Fibers Sustainable Use of Polypropylene Fibers as a Cement Mortar Reinforcement [Volume 35, Issue 8, 2022, Pages 1494-1500]
  • Porous Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
  • Posterior Probability Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
  • Power Consumption Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
  • Power quality Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
  • Power system security Cost-based Risk Approach for Spinning Reserve Assessment in Bulk Power Systems [Volume 35, Issue 11, 2022, Pages 2186-2195]
  • Power Transformer Protection Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
  • Pozzolan Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
  • Precast concrete Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
  • Predicting Elections Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
  • Prefabricated foam concrete Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
  • Prequalified connections Bolt Pre-tension Effect on Performance of Bolted Extended End-plate Moment Connections under Cyclic Loading [Volume 35, Issue 3, 2022, Pages 531-543]
  • Pre-saturation Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
  • Prestressed slabs Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]
  • Pricing Uncertainty Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]
  • Primary-secondary structure interaction Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Principal component analysis A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
  • Principal component analysis Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
  • Probabilistic TSVM Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
  • Probability of detection Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
  • Production-Assembly Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
  • Productivity Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
  • Profitability Analyzing Factors Influencing Mobile Social Media Marketing Acceptance among Customers [Volume 35, Issue 6, 2022, Pages 1209-1216]
  • Progressive collapse Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]
  • Project scheduling A Constraint Programming Approach to Solve Multi-skill Resource-constrained Project Scheduling Problem with Calendars [Volume 35, Issue 8, 2022, Pages 1579-1587]
  • Proportional Differential Angle Control Bionic Perception Method of Navel Orange Plucking Position Based on Fmincon and PD Angle Control [Volume 35, Issue 11, 2022, Pages 2265-2274]
  • Pullout Capacity Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
  • Pulp Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
  • Pulse Power Generator A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
  • Pumice Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
  • Punching shear Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
  • PWM rectifier A New Technique for Online Open Switch Fault Detection and Location in Single-phase Pulse Width Modulation Rectifier [Volume 35, Issue 9, 2022, Pages 1759-1764]
  • Pyramid tree Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]

Q

  • Quality Culture Maturity Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
  • Quantum-dot Cellular Automata Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
  • Quarantine An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
  • Questionnaire Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]

R

  • Rack cutter A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
  • Radiation shielding concrete Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Radiator fan module Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
  • Radio refractivity Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
  • Raft Behavior of Raft Foundation Built on Layered Soil under Different Earthquake Excitation [Volume 35, Issue 8, 2022, Pages 1509-1515]
  • Random Vortex Method Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
  • Rapid Chloride Penetration Test An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
  • Reactive powder Concrete Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
  • Reactive powder Concrete An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
  • Receiced Signal Strength Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
  • Reclaimed Asphalt Pavement 3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
  • Rectangular Channel Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths [Volume 35, Issue 4, 2022, Pages 685-691]
  • Recycled aggregate concrete Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
  • Recycled concrete aggregates Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
  • Recycled steel fiber Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
  • Red Deer algorithm Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
  • Redundant Manipulator Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
  • Regression Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
  • Regression-based design formula Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
  • Regression Model Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
  • Rehabilitation Robot Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
  • Reinforced concrete beam Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
  • Reinforcement Learning A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
  • Reinforcements Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
  • Relative Density An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
  • Reliability The Reliability Assessment of a Ship Structure under Corrosion and Fatigue, using Structural Health Monitoring [Volume 35, Issue 9, 2022, Pages 1765-1778]
  • Reliability centered maintenance Prioritization of Transmission Network Components Based on their Failure Impact on Reliability of Composite Power Systems [Volume 35, Issue 3, 2022, Pages 502-509]
  • Reliability evaluation Prioritization of Transmission Network Components Based on their Failure Impact on Reliability of Composite Power Systems [Volume 35, Issue 3, 2022, Pages 502-509]
  • Reliability Index Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
  • Repeatability Analysis Randon Causes Repeatability Errors Inducted by Friction at Joints in Industrial Robots [Volume 35, Issue 2, 2022, Pages 451-457]
  • Repetitive Bipolar Pulse Generator A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
  • Residual compressive strength Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
  • Residual Self-attention Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • Residual Stress Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
  • Resistance spot weld Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
  • Response Surface Methodology Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
  • Response Surface Methodology Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Response Surface Methodology Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Retardation Factor Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Retinopathy of Premature An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
  • Rheological properties Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
  • Rheology Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
  • Ribbed slab Static and Dynamic Behavior of High-strength Lightweight Reinforced Concrete One-way Ribbed Slabs [Volume 35, Issue 4, 2022, Pages 732-739]
  • Rice Husk Ash Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
  • Risk Assessment Cost-based Risk Approach for Spinning Reserve Assessment in Bulk Power Systems [Volume 35, Issue 11, 2022, Pages 2186-2195]
  • Risk Management A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
  • Risky driving behavior Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
  • River Sand Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
  • Road Safety Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
  • Road Traffic Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
  • Robust fuzzy method A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
  • Rock Layer Investigating the Effect of Soil Layering on Soil-structure Interaction under Seismic Load [Volume 35, Issue 10, 2022, Pages 1989-2006]
  • Root mean square error Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
  • Root Mechanical Properties Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
  • RT-LAB Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
  • Rubcerte Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
  • Rubcrete Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
  • Rutting 3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]

S

  • Salt Crystallization Test An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
  • Sandwich beam Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
  • Sap Permeate Flux Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Sawdust Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
  • Schwarz-Christoffel conformal mapping Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
  • Seagull Optimization An Efficient Task Scheduling Based on Seagull Optimization Algorithm for Heterogeneous Cloud Computing Platforms [Volume 35, Issue 2, 2022, Pages 433-450]
  • Security Digital Communication Based on Image Security using Grasshopper Optimization and Chaotic Map [Volume 35, Issue 10, 2022, Pages 1981-1988]
  • Seismic Resistance Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
  • Seismic response Experimental and Numerical Study on a New Double-walled Tuned Liquid Damper [Volume 35, Issue 1, 2022, Pages 29-44]
  • Seismic response Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Selective harmonic elimination A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
  • Selectivity Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
  • Self-Compacting Concrete Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
  • Self-excited oscillating jet Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
  • Semantic Similarity A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
  • Separation Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
  • Sequential energization Inrush Current Reduction by a Point-on-wave Energization Strategy and Sequential Phase Shifting in Three-Phase Transformer [Volume 35, Issue 12, 2022, Pages 2321-2328]
  • Sequentially coupled thermal-stress analysis Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
  • Serpentine aggregates Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
  • Servo-Hydraulic UTM Material Testing Machine Suite Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
  • Sesame oil Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
  • Settlement Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
  • Shallow foundation A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
  • Shape memory alloy Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
  • Shape memory alloys Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
  • Shear Force Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Shear Reinforcement Steel Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
  • Shear strength Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
  • Shear strength Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
  • Shear Stress In Silico Analysis of Stem Cells Mechanical Stimulations for Mechnoregulation Toward Cardiomyocytes [Volume 35, Issue 11, 2022, Pages 2229-2237]
  • Shift register Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
  • Ship Structure Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
  • Short-term load A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Shunting Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
  • Signalized Intersection Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
  • Signal to noise ratio Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
  • Signal to noise ratio Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Silica fume Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • Silica Nano Particles Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
  • Silica Xerogel Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Silicon oxide Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
  • Simcenter Amesim Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
  • Simplicial Element Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
  • Simscape Multibody Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
  • Simulated Annealing Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
  • Simulation Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
  • Simulation Method Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
  • Single machine scheduling problem Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
  • Single Point Incremental Forming Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
  • Single Point Incremental Forming Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
  • Sinusoidal load Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
  • Sisfall Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
  • Six Big Losses Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
  • Smart Structures Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
  • Social Media Analyzing Factors Influencing Mobile Social Media Marketing Acceptance among Customers [Volume 35, Issue 6, 2022, Pages 1209-1216]
  • Soft actuator Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
  • Soft soil Investigating the Effect of Soil Layering on Soil-structure Interaction under Seismic Load [Volume 35, Issue 10, 2022, Pages 1989-2006]
  • Soil and Structure Interaction Investigating the Effect of Soil Layering on Soil-structure Interaction under Seismic Load [Volume 35, Issue 10, 2022, Pages 1989-2006]
  • Soil– structure interaction A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
  • Soil Structure Interaction Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
  • Soil structure modification Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
  • Soil Washing Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
  • Solar air heaters Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
  • Solar energy An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • Solvothermal process Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
  • Sound Absorption Coefficient Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
  • Space Vector Pulse Width and Amplitude Modulation An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
  • Spark Plasma Sintering Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
  • Square Lattice A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
  • Stability Point Curve Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
  • Stabilized Clay Soil The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
  • Stable Operation Limits Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
  • Stakeholders A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
  • Statistical process monitoring Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
  • Steel Fiber Static and Dynamic Behavior of High-strength Lightweight Reinforced Concrete One-way Ribbed Slabs [Volume 35, Issue 4, 2022, Pages 732-739]
  • Steel Fiber Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
  • Steel Fibers Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
  • Steel Fibers Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Steel Moment Investigating the Effect of Soil Layering on Soil-structure Interaction under Seismic Load [Volume 35, Issue 10, 2022, Pages 1989-2006]
  • Steel Tube Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
  • Stern Flap Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
  • Stiffness index Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
  • Stiffness match Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
  • STM32F407VG microcontroller Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
  • Stochastic programming Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
  • Straight piles An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
  • Strain amplitude Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
  • Stress Distribution Analytical Investigation on the Stress Distribution in Structural Elements Reinforced with Laminates Subjected to Axial Loads [Volume 35, Issue 4, 2022, Pages 692-697]
  • Stress-strain relationship Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
  • Structural Gate-level Analysis Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
  • Structural rubcrete Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
  • Subcontracting Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
  • Successive repair Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
  • Sugarcane Molasses Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
  • SuperCapacitor Energy Storage Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
  • Super-resolution Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
  • Supplementary cementitious materials Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
  • Supplier selection Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
  • Supply Chain Management Telecommunication Industry A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
  • Support vector machine (SVM) Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
  • Surface Free Energy Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
  • Surface modification Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
  • Surface roughness Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
  • Surface roughness Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
  • Surface roughness Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
  • Surface roughness Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Surfactant An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • Suspension System Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]
  • Sustainability A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
  • Sustainability Sustainable Use of Polypropylene Fibers as a Cement Mortar Reinforcement [Volume 35, Issue 8, 2022, Pages 1494-1500]
  • Sustainable Concrete Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
  • Synergy Assessment Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • System dynamic An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]

T

  • Taguchi Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
  • Taguchi Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
  • Taguchi method Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
  • Takagi Sugeno Fuzzy Controller Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
  • Tapered Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
  • Task scheduling An Efficient Task Scheduling Based on Seagull Optimization Algorithm for Heterogeneous Cloud Computing Platforms [Volume 35, Issue 2, 2022, Pages 433-450]
  • Tax Affairs Organization A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
  • Techno-economic analysis Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
  • Technology Transfer New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
  • Temporal Gene Expression Profile An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
  • Tensile load Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
  • Ternary Blended Concrete Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
  • Text Categorization Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
  • Texture segmentation A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
  • Thermal conductivity Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
  • Thermal Performance An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • Thermal spraying High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
  • Thermal storage Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
  • Thermogravimetric analysis High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
  • Thickness Distribution Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
  • Three-dimensional tree Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]
  • Three-phase PWM Back to-back converters Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
  • Three-sheet spot welded joint Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
  • Thyristor Switch Capacitor Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
  • Ti-6Al-4V Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Ti6Al4V Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
  • Ti-6Al-4V alloy Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
  • Time window Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
  • Titania Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
  • Titanium alloy Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
  • T-junction Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
  • Top-hat filter An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
  • TOPKOR Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
  • TOPSIS Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
  • TOPSIS Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
  • Total completion time Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
  • Total Productive Maintenance Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
  • Traditional proportional-integral Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
  • Transesterification Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
  • Transfer matrix method Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
  • Transimpedance amplifier A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
  • Transportation A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Transverse reinforcement Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
  • Triaxial Tests Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
  • TRIP1100 steel Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
  • Tthermos-hydraulic Efficiency Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
  • Tungsten Inert Gas Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
  • Turbulent Flow Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
  • Turkish Electricity Transmission Company A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
  • Twitter Data Analysis Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
  • Two-Dimensional Functionally Graded Materials Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
  • Two-element Deposits Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]
  • Two-phase flow Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
  • Two-Way Concrete Slabs Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]

U

  • Ultra-High performance concrete Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
  • Ultra-high Performance Fiber Reinforced Concrete Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
  • Ultra-high Temperature Ceramic Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
  • Ultrasonic Vibration Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
  • Ultrasonic Vibration Enhanced Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
  • Uncertainty A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
  • Unclassifiable Region Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
  • Unconfined compressive strength Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
  • Undercutting A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
  • Universal Filtered Multicarrier Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
  • Unsupervised Learning The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
  • Unused energies A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]

V

  • Vaccination An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
  • Variable neighborhood search A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
  • Variable Speed Wind Turbine Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
  • Variational mode decomposition Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
  • Various Vehicles Movement Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
  • Vertical Bearing Capacity An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
  • Vibration Analysis Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
  • Vibration mitigation Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals [Volume 35, Issue 7, 2022, Pages 1398-1415]
  • Vierendeel beam A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
  • Virtual Social Network Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
  • Viscoelastic Properties Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
  • Voting Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]

W

  • Waste Glass Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
  • Water depth Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
  • Water supply and wastewater collection Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
  • Wave Tank Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
  • Wear Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
  • Wear Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
  • Wear Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
  • Wearable Sensors Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
  • Welding defect Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
  • Welding defect Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
  • Wet Tailing Process Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
  • Wideband Amplifier A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
  • Wind tunnel test Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
  • Wind Turbine Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
  • Wire Electric Discharge Machining Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
  • Wireless Body Area Networks Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
  • Wireless communication Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
  • Wireless Security Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
  • Wireless Sensor Network Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
  • Work breakdown structure Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
  • World-class manufacturing New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]

Y

  • Yeast An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]

Z

  • Zeolite Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
  • Zeolite Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
  • Zero-period acceleration Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
  • Ziegler-Natta Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
  • Ziegler-Nichols method Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
  • Zinc oxide nanoparticles Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]